venv/lib/python3.11/site-packages/sympy/series/gruntz.py

"""
Limits
======

Implemented according to the PhD thesis
https://www.cybertester.com/data/gruntz.pdf, which contains very thorough
descriptions of the algorithm including many examples.  We summarize here
the gist of it.

All functions are sorted according to how rapidly varying they are at
infinity using the following rules. Any two functions f and g can be
compared using the properties of L:

L=lim  log|f(x)| / log|g(x)|           (for x -> oo)

We define >, < ~ according to::

    1. f > g .... L=+-oo

        we say that:
        - f is greater than any power of g
        - f is more rapidly varying than g
        - f goes to infinity/zero faster than g

    2. f < g .... L=0

        we say that:
        - f is lower than any power of g

    3. f ~ g .... L!=0, +-oo

        we say that:
        - both f and g are bounded from above and below by suitable integral
          powers of the other

Examples
========
::
    2 < x < exp(x) < exp(x**2) < exp(exp(x))
    2 ~ 3 ~ -5
    x ~ x**2 ~ x**3 ~ 1/x ~ x**m ~ -x
    exp(x) ~ exp(-x) ~ exp(2x) ~ exp(x)**2 ~ exp(x+exp(-x))
    f ~ 1/f

So we can divide all the functions into comparability classes (x and x^2
belong to one class, exp(x) and exp(-x) belong to some other class). In
principle, we could compare any two functions, but in our algorithm, we
do not compare anything below the class 2~3~-5 (for example log(x) is
below this), so we set 2~3~-5 as the lowest comparability class.

Given the function f, we find the list of most rapidly varying (mrv set)
subexpressions of it. This list belongs to the same comparability class.
Let's say it is {exp(x), exp(2x)}. Using the rule f ~ 1/f we find an
element "w" (either from the list or a new one) from the same
comparability class which goes to zero at infinity. In our example we
set w=exp(-x) (but we could also set w=exp(-2x) or w=exp(-3x) ...). We
rewrite the mrv set using w, in our case {1/w, 1/w^2}, and substitute it
into f. Then we expand f into a series in w::

    f = c0*w^e0 + c1*w^e1 + ... + O(w^en),       where e0<e1<...<en, c0!=0

but for x->oo, lim f = lim c0*w^e0, because all the other terms go to zero,
because w goes to zero faster than the ci and ei. So::

    for e0>0, lim f = 0
    for e0<0, lim f = +-oo   (the sign depends on the sign of c0)
    for e0=0, lim f = lim c0

We need to recursively compute limits at several places of the algorithm, but
as is shown in the PhD thesis, it always finishes.

Important functions from the implementation:

compare(a, b, x) compares "a" and "b" by computing the limit L.
mrv(e, x) returns list of most rapidly varying (mrv) subexpressions of "e"
rewrite(e, Omega, x, wsym) rewrites "e" in terms of w
leadterm(f, x) returns the lowest power term in the series of f
mrv_leadterm(e, x) returns the lead term (c0, e0) for e
limitinf(e, x) computes lim e  (for x->oo)
limit(e, z, z0) computes any limit by converting it to the case x->oo

All the functions are really simple and straightforward except
rewrite(), which is the most difficult/complex part of the algorithm.
When the algorithm fails, the bugs are usually in the series expansion
(i.e. in SymPy) or in rewrite.

This code is almost exact rewrite of the Maple code inside the Gruntz
thesis.

Debugging
---------

Because the gruntz algorithm is highly recursive, it's difficult to
figure out what went wrong inside a debugger. Instead, turn on nice
debug prints by defining the environment variable SYMPY_DEBUG. For
example:

[user@localhost]: SYMPY_DEBUG=True ./bin/isympy

In [1]: limit(sin(x)/x, x, 0)
limitinf(_x*sin(1/_x), _x) = 1
+-mrv_leadterm(_x*sin(1/_x), _x) = (1, 0)
| +-mrv(_x*sin(1/_x), _x) = set([_x])
| | +-mrv(_x, _x) = set([_x])
| | +-mrv(sin(1/_x), _x) = set([_x])
| |   +-mrv(1/_x, _x) = set([_x])
| |     +-mrv(_x, _x) = set([_x])
| +-mrv_leadterm(exp(_x)*sin(exp(-_x)), _x, set([exp(_x)])) = (1, 0)
|   +-rewrite(exp(_x)*sin(exp(-_x)), set([exp(_x)]), _x, _w) = (1/_w*sin(_w), -_x)
|     +-sign(_x, _x) = 1
|     +-mrv_leadterm(1, _x) = (1, 0)
+-sign(0, _x) = 0
+-limitinf(1, _x) = 1

And check manually which line is wrong. Then go to the source code and
debug this function to figure out the exact problem.

"""
from functools import reduce

from sympy.core import Basic, S, Mul, PoleError
from sympy.core.cache import cacheit
from sympy.core.function import AppliedUndef
from sympy.core.intfunc import ilcm
from sympy.core.numbers import I, oo
from sympy.core.symbol import Dummy, Wild
from sympy.core.traversal import bottom_up

from sympy.functions import log, exp, sign as _sign
from sympy.series.order import Order
from sympy.utilities.misc import debug_decorator as debug
from sympy.utilities.timeutils import timethis

timeit = timethis('gruntz')


def compare(a, b, x):
    """Returns "<" if a<b, "=" for a == b, ">" for a>b"""
    # log(exp(...)) must always be simplified here for termination
    la, lb = log(a), log(b)
    if isinstance(a, Basic) and (isinstance(a, exp) or (a.is_Pow and a.base == S.Exp1)):
        la = a.exp
    if isinstance(b, Basic) and (isinstance(b, exp) or (b.is_Pow and b.base == S.Exp1)):
        lb = b.exp

    c = limitinf(la/lb, x)
    if c == 0:
        return "<"
    elif c.is_infinite:
        return ">"
    else:
        return "="


class SubsSet(dict):
    """
    Stores (expr, dummy) pairs, and how to rewrite expr-s.

    Explanation
    ===========

    The gruntz algorithm needs to rewrite certain expressions in term of a new
    variable w. We cannot use subs, because it is just too smart for us. For
    example::

        > Omega=[exp(exp(_p - exp(-_p))/(1 - 1/_p)), exp(exp(_p))]
        > O2=[exp(-exp(_p) + exp(-exp(-_p))*exp(_p)/(1 - 1/_p))/_w, 1/_w]
        > e = exp(exp(_p - exp(-_p))/(1 - 1/_p)) - exp(exp(_p))
        > e.subs(Omega[0],O2[0]).subs(Omega[1],O2[1])
        -1/w + exp(exp(p)*exp(-exp(-p))/(1 - 1/p))

    is really not what we want!

    So we do it the hard way and keep track of all the things we potentially
    want to substitute by dummy variables. Consider the expression::

        exp(x - exp(-x)) + exp(x) + x.

    The mrv set is {exp(x), exp(-x), exp(x - exp(-x))}.
    We introduce corresponding dummy variables d1, d2, d3 and rewrite::

        d3 + d1 + x.

    This class first of all keeps track of the mapping expr->variable, i.e.
    will at this stage be a dictionary::

        {exp(x): d1, exp(-x): d2, exp(x - exp(-x)): d3}.

    [It turns out to be more convenient this way round.]
    But sometimes expressions in the mrv set have other expressions from the
    mrv set as subexpressions, and we need to keep track of that as well. In
    this case, d3 is really exp(x - d2), so rewrites at this stage is::

        {d3: exp(x-d2)}.

    The function rewrite uses all this information to correctly rewrite our
    expression in terms of w. In this case w can be chosen to be exp(-x),
    i.e. d2. The correct rewriting then is::

        exp(-w)/w + 1/w + x.
    """
    def __init__(self):
        self.rewrites = {}

    def __repr__(self):
        return super().__repr__() + ', ' + self.rewrites.__repr__()

    def __getitem__(self, key):
        if key not in self:
            self[key] = Dummy()
        return dict.__getitem__(self, key)

    def do_subs(self, e):
        """Substitute the variables with expressions"""
        for expr, var in self.items():
            e = e.xreplace({var: expr})
        return e

    def meets(self, s2):
        """Tell whether or not self and s2 have non-empty intersection"""
        return set(self.keys()).intersection(list(s2.keys())) != set()

    def union(self, s2, exps=None):
        """Compute the union of self and s2, adjusting exps"""
        res = self.copy()
        tr = {}
        for expr, var in s2.items():
            if expr in self:
                if exps:
                    exps = exps.xreplace({var: res[expr]})
                tr[var] = res[expr]
            else:
                res[expr] = var
        for var, rewr in s2.rewrites.items():
            res.rewrites[var] = rewr.xreplace(tr)
        return res, exps

    def copy(self):
        """Create a shallow copy of SubsSet"""
        r = SubsSet()
        r.rewrites = self.rewrites.copy()
        for expr, var in self.items():
            r[expr] = var
        return r


@debug
def mrv(e, x):
    """Returns a SubsSet of most rapidly varying (mrv) subexpressions of 'e',
       and e rewritten in terms of these"""
    from sympy.simplify.powsimp import powsimp
    e = powsimp(e, deep=True, combine='exp')
    if not isinstance(e, Basic):
        raise TypeError("e should be an instance of Basic")
    if not e.has(x):
        return SubsSet(), e
    elif e == x:
        s = SubsSet()
        return s, s[x]
    elif e.is_Mul or e.is_Add:
        i, d = e.as_independent(x)  # throw away x-independent terms
        if d.func != e.func:
            s, expr = mrv(d, x)
            return s, e.func(i, expr)
        a, b = d.as_two_terms()
        s1, e1 = mrv(a, x)
        s2, e2 = mrv(b, x)
        return mrv_max1(s1, s2, e.func(i, e1, e2), x)
    elif e.is_Pow and e.base != S.Exp1:
        e1 = S.One
        while e.is_Pow:
            b1 = e.base
            e1 *= e.exp
            e = b1
        if b1 == 1:
            return SubsSet(), b1
        if e1.has(x):
            return mrv(exp(e1*log(b1)), x)
        else:
            s, expr = mrv(b1, x)
            return s, expr**e1
    elif isinstance(e, log):
        s, expr = mrv(e.args[0], x)
        return s, log(expr)
    elif isinstance(e, exp) or (e.is_Pow and e.base == S.Exp1):
        # We know from the theory of this algorithm that exp(log(...)) may always
        # be simplified here, and doing so is vital for termination.
        if isinstance(e.exp, log):
            return mrv(e.exp.args[0], x)
        # if a product has an infinite factor the result will be
        # infinite if there is no zero, otherwise NaN; here, we
        # consider the result infinite if any factor is infinite
        li = limitinf(e.exp, x)
        if any(_.is_infinite for _ in Mul.make_args(li)):
            s1 = SubsSet()
            e1 = s1[e]
            s2, e2 = mrv(e.exp, x)
            su = s1.union(s2)[0]
            su.rewrites[e1] = exp(e2)
            return mrv_max3(s1, e1, s2, exp(e2), su, e1, x)
        else:
            s, expr = mrv(e.exp, x)
            return s, exp(expr)
    elif isinstance(e, AppliedUndef):
        raise ValueError("MRV set computation for UndefinedFunction is not allowed")
    elif e.is_Function:
        l = [mrv(a, x) for a in e.args]
        l2 = [s for (s, _) in l if s != SubsSet()]
        if len(l2) != 1:
            # e.g. something like BesselJ(x, x)
            raise NotImplementedError("MRV set computation for functions in"
                                      " several variables not implemented.")
        s, ss = l2[0], SubsSet()
        args = [ss.do_subs(x[1]) for x in l]
        return s, e.func(*args)
    elif e.is_Derivative:
        raise NotImplementedError("MRV set computation for derivatives"
                                  " not implemented yet.")
    raise NotImplementedError(
        "Don't know how to calculate the mrv of '%s'" % e)


def mrv_max3(f, expsf, g, expsg, union, expsboth, x):
    """
    Computes the maximum of two sets of expressions f and g, which
    are in the same comparability class, i.e. max() compares (two elements of)
    f and g and returns either (f, expsf) [if f is larger], (g, expsg)
    [if g is larger] or (union, expsboth) [if f, g are of the same class].
    """
    if not isinstance(f, SubsSet):
        raise TypeError("f should be an instance of SubsSet")
    if not isinstance(g, SubsSet):
        raise TypeError("g should be an instance of SubsSet")
    if f == SubsSet():
        return g, expsg
    elif g == SubsSet():
        return f, expsf
    elif f.meets(g):
        return union, expsboth

    c = compare(list(f.keys())[0], list(g.keys())[0], x)
    if c == ">":
        return f, expsf
    elif c == "<":
        return g, expsg
    else:
        if c != "=":
            raise ValueError("c should be =")
        return union, expsboth


def mrv_max1(f, g, exps, x):
    """Computes the maximum of two sets of expressions f and g, which
    are in the same comparability class, i.e. mrv_max1() compares (two elements of)
    f and g and returns the set, which is in the higher comparability class
    of the union of both, if they have the same order of variation.
    Also returns exps, with the appropriate substitutions made.
    """
    u, b = f.union(g, exps)
    return mrv_max3(f, g.do_subs(exps), g, f.do_subs(exps),
                    u, b, x)


@debug
@cacheit
@timeit
def sign(e, x):
    """
    Returns a sign of an expression e(x) for x->oo.

    ::

        e >  0 for x sufficiently large ...  1
        e == 0 for x sufficiently large ...  0
        e <  0 for x sufficiently large ... -1

    The result of this function is currently undefined if e changes sign
    arbitrarily often for arbitrarily large x (e.g. sin(x)).

    Note that this returns zero only if e is *constantly* zero
    for x sufficiently large. [If e is constant, of course, this is just
    the same thing as the sign of e.]
    """
    if not isinstance(e, Basic):
        raise TypeError("e should be an instance of Basic")

    if e.is_positive:
        return 1
    elif e.is_negative:
        return -1
    elif e.is_zero:
        return 0

    elif not e.has(x):
        from sympy.simplify import logcombine
        e = logcombine(e)
        return _sign(e)
    elif e == x:
        return 1
    elif e.is_Mul:
        a, b = e.as_two_terms()
        sa = sign(a, x)
        if not sa:
            return 0
        return sa * sign(b, x)
    elif isinstance(e, exp):
        return 1
    elif e.is_Pow:
        if e.base == S.Exp1:
            return 1
        s = sign(e.base, x)
        if s == 1:
            return 1
        if e.exp.is_Integer:
            return s**e.exp
    elif isinstance(e, log) and e.args[0].is_positive:
        return sign(e.args[0] - 1, x)

    # if all else fails, do it the hard way
    c0, e0 = mrv_leadterm(e, x)
    return sign(c0, x)


@debug
@timeit
@cacheit
def limitinf(e, x):
    """Limit e(x) for x-> oo."""
    # rewrite e in terms of tractable functions only

    old = e
    if not e.has(x):
        return e  # e is a constant
    from sympy.simplify.powsimp import powdenest
    from sympy.calculus.util import AccumBounds
    if e.has(Order):
        e = e.expand().removeO()
    if not x.is_positive or x.is_integer:
        # We make sure that x.is_positive is True and x.is_integer is None
        # so we get all the correct mathematical behavior from the expression.
        # We need a fresh variable.
        p = Dummy('p', positive=True)
        e = e.subs(x, p)
        x = p
    e = e.rewrite('tractable', deep=True, limitvar=x)
    e = powdenest(e)
    if isinstance(e, AccumBounds):
        if mrv_leadterm(e.min, x) != mrv_leadterm(e.max, x):
            raise NotImplementedError
        c0, e0 = mrv_leadterm(e.min, x)
    else:
        c0, e0 = mrv_leadterm(e, x)
    sig = sign(e0, x)
    if sig == 1:
        return S.Zero  # e0>0: lim f = 0
    elif sig == -1:  # e0<0: lim f = +-oo (the sign depends on the sign of c0)
        if c0.match(I*Wild("a", exclude=[I])):
            return c0*oo
        s = sign(c0, x)
        # the leading term shouldn't be 0:
        if s == 0:
            raise ValueError("Leading term should not be 0")
        return s*oo
    elif sig == 0:
        if c0 == old:
            c0 = c0.cancel()
        return limitinf(c0, x)  # e0=0: lim f = lim c0
    else:
        raise ValueError("{} could not be evaluated".format(sig))


def moveup2(s, x):
    r = SubsSet()
    for expr, var in s.items():
        r[expr.xreplace({x: exp(x)})] = var
    for var, expr in s.rewrites.items():
        r.rewrites[var] = s.rewrites[var].xreplace({x: exp(x)})
    return r


def moveup(l, x):
    return [e.xreplace({x: exp(x)}) for e in l]


@debug
@timeit
@cacheit
def mrv_leadterm(e, x):
    """Returns (c0, e0) for e."""
    Omega = SubsSet()
    if not e.has(x):
        return (e, S.Zero)
    if Omega == SubsSet():
        Omega, exps = mrv(e, x)
    if not Omega:
        # e really does not depend on x after simplification
        return exps, S.Zero
    if x in Omega:
        # move the whole omega up (exponentiate each term):
        Omega_up = moveup2(Omega, x)
        exps_up = moveup([exps], x)[0]
        # NOTE: there is no need to move this down!
        Omega = Omega_up
        exps = exps_up
    #
    # The positive dummy, w, is used here so log(w*2) etc. will expand;
    # a unique dummy is needed in this algorithm
    #
    # For limits of complex functions, the algorithm would have to be
    # improved, or just find limits of Re and Im components separately.
    #
    w = Dummy("w", positive=True)
    f, logw = rewrite(exps, Omega, x, w)

    # Ensure expressions of the form exp(log(...)) don't get simplified automatically in the previous steps.
    # see: https://github.com/sympy/sympy/issues/15323#issuecomment-478639399
    f = f.replace(lambda f: f.is_Pow and f.has(x), lambda f: exp(log(f.base)*f.exp))

    try:
        lt = f.leadterm(w, logx=logw)
    except (NotImplementedError, PoleError, ValueError):
        n0 = 1
        _series = Order(1)
        incr = S.One
        while _series.is_Order:
            _series = f._eval_nseries(w, n=n0+incr, logx=logw)
            incr *= 2
        series = _series.expand().removeO()
        try:
            lt = series.leadterm(w, logx=logw)
        except (NotImplementedError, PoleError, ValueError):
            lt = f.as_coeff_exponent(w)
            if lt[0].has(w):
                base = f.as_base_exp()[0].as_coeff_exponent(w)
                ex = f.as_base_exp()[1]
                lt = (base[0]**ex, base[1]*ex)
    return (lt[0].subs(log(w), logw), lt[1])


def build_expression_tree(Omega, rewrites):
    r""" Helper function for rewrite.

    We need to sort Omega (mrv set) so that we replace an expression before
    we replace any expression in terms of which it has to be rewritten::

        e1 ---> e2 ---> e3
                 \
                  -> e4

    Here we can do e1, e2, e3, e4 or e1, e2, e4, e3.
    To do this we assemble the nodes into a tree, and sort them by height.

    This function builds the tree, rewrites then sorts the nodes.
    """
    class Node:
        def __init__(self):
            self.before = []
            self.expr = None
            self.var = None
        def ht(self):
            return reduce(lambda x, y: x + y,
                          [x.ht() for x in self.before], 1)
    nodes = {}
    for expr, v in Omega:
        n = Node()
        n.var = v
        n.expr = expr
        nodes[v] = n
    for _, v in Omega:
        if v in rewrites:
            n = nodes[v]
            r = rewrites[v]
            for _, v2 in Omega:
                if r.has(v2):
                    n.before.append(nodes[v2])

    return nodes


@debug
@timeit
def rewrite(e, Omega, x, wsym):
    """e(x) ... the function
    Omega ... the mrv set
    wsym ... the symbol which is going to be used for w

    Returns the rewritten e in terms of w and log(w). See test_rewrite1()
    for examples and correct results.
    """

    from sympy import AccumBounds
    if not isinstance(Omega, SubsSet):
        raise TypeError("Omega should be an instance of SubsSet")
    if len(Omega) == 0:
        raise ValueError("Length cannot be 0")
    # all items in Omega must be exponentials
    for t in Omega.keys():
        if not isinstance(t, exp):
            raise ValueError("Value should be exp")
    rewrites = Omega.rewrites
    Omega = list(Omega.items())

    nodes = build_expression_tree(Omega, rewrites)
    Omega.sort(key=lambda x: nodes[x[1]].ht(), reverse=True)

    # make sure we know the sign of each exp() term; after the loop,
    # g is going to be the "w" - the simplest one in the mrv set
    for g, _ in Omega:
        sig = sign(g.exp, x)
        if sig != 1 and sig != -1 and not sig.has(AccumBounds):
            raise NotImplementedError('Result depends on the sign of %s' % sig)
    if sig == 1:
        wsym = 1/wsym  # if g goes to oo, substitute 1/w
    # O2 is a list, which results by rewriting each item in Omega using "w"
    O2 = []
    denominators = []
    for f, var in Omega:
        c = limitinf(f.exp/g.exp, x)
        if c.is_Rational:
            denominators.append(c.q)
        arg = f.exp
        if var in rewrites:
            if not isinstance(rewrites[var], exp):
                raise ValueError("Value should be exp")
            arg = rewrites[var].args[0]
        O2.append((var, exp((arg - c*g.exp))*wsym**c))

    # Remember that Omega contains subexpressions of "e". So now we find
    # them in "e" and substitute them for our rewriting, stored in O2

    # the following powsimp is necessary to automatically combine exponentials,
    # so that the .xreplace() below succeeds:
    # TODO this should not be necessary
    from sympy.simplify.powsimp import powsimp
    f = powsimp(e, deep=True, combine='exp')
    for a, b in O2:
        f = f.xreplace({a: b})

    for _, var in Omega:
        assert not f.has(var)

    # finally compute the logarithm of w (logw).
    logw = g.exp
    if sig == 1:
        logw = -logw  # log(w)->log(1/w)=-log(w)

    # Some parts of SymPy have difficulty computing series expansions with
    # non-integral exponents. The following heuristic improves the situation:
    exponent = reduce(ilcm, denominators, 1)
    f = f.subs({wsym: wsym**exponent})
    logw /= exponent

    # bottom_up function is required for a specific case - when f is
    # -exp(p/(p + 1)) + exp(-p**2/(p + 1) + p). No current simplification
    # methods reduce this to 0 while not expanding polynomials.
    f = bottom_up(f, lambda w: getattr(w, 'normal', lambda: w)())

    return f, logw


def gruntz(e, z, z0, dir="+"):
    """
    Compute the limit of e(z) at the point z0 using the Gruntz algorithm.

    Explanation
    ===========

    ``z0`` can be any expression, including oo and -oo.

    For ``dir="+"`` (default) it calculates the limit from the right
    (z->z0+) and for ``dir="-"`` the limit from the left (z->z0-). For infinite z0
    (oo or -oo), the dir argument does not matter.

    This algorithm is fully described in the module docstring in the gruntz.py
    file. It relies heavily on the series expansion. Most frequently, gruntz()
    is only used if the faster limit() function (which uses heuristics) fails.
    """
    if not z.is_symbol:
        raise NotImplementedError("Second argument must be a Symbol")

    # convert all limits to the limit z->oo; sign of z is handled in limitinf
    r = None
    if z0 in (oo, I*oo):
        e0 = e
    elif z0 in (-oo, -I*oo):
        e0 = e.subs(z, -z)
    else:
        if str(dir) == "-":
            e0 = e.subs(z, z0 - 1/z)
        elif str(dir) == "+":
            e0 = e.subs(z, z0 + 1/z)
        else:
            raise NotImplementedError("dir must be '+' or '-'")

    r = limitinf(e0, z)

    # This is a bit of a heuristic for nice results... we always rewrite
    # tractable functions in terms of familiar intractable ones.
    # It might be nicer to rewrite the exactly to what they were initially,
    # but that would take some work to implement.
    return r.rewrite('intractable', deep=True)